Author: Hazel
August
Well, the rest of the school summer holidays have gone past in a blur of packing and moving. The move is the result of a job change for my other half. Some of our belongings have gone into storage (including 2 of my wheels and the four shaft loom!) but most have made it to our new temporary home (including all of my wool stash – except raw fleece).
Once we were mostly settled (there are still boxes – but nothing urgent) I managed to try blending some different fibres on the drum carder.
I’ve not tried spinning anything other than wool – so this was a fun experiment. I had some soybean fibre to try – but it’s very fine and slippery – so I’ve blended it with moorit and black Shetland tops and a little bit of sparkle for good measure.
I found the soybean fibres very hard to control – they liked bunching up on the drum carder. However, repeatedly passing the batts through the carder helped to break up the clumps of fibre and the resulting batts look lovely (for some reason they remind me of frothy coffee!). I’ve been spinning these longdraw on my Dryad wheel. So far I have two bobbins of singles spun – which I plan to make into a 2-ply yarn. As yet I don’t have a plan for this yarn (perhaps a Mobius shawl?).
If it’s a nice day tomorrow I’ll take some pictures and publish them here.
Day 2 of the school holidays
Today I thought there was quiet and occupied playing in the lounge. Only when I heard “boing!” … “oops” did I discover that I was now short of one retractable tape measure:
My son and I have carded about half of the wool we dyed yesterday. So far we have three different coloured batts. My son also did a small amount of spinning on the spindle. So far he’s finding “spin, park and draft” to be a successful way to proceed.
I thoroughly enjoyed making the batts from the different coloured fibres we randomly dyed yesterday – so I think I’ll be using this method for my own projects in the future.
Dyeing on the first day of the school holidays
It’s the first day of the school summer holiday. My son would like to do some spinning during the holidays. To get started we dyed – using artificial food dyes and vinegar – some fleece. When it’s dry we’ll card it up ready for spinning. (This is the first time I’ve dyed fleece using acid dyes so it was a great learning experience for me too).
Finishing Things
I currently have a quite large selection of unfinished projects (the ones I can recall are):
- a woven shawl with overshot pattern.
- a pair of brightly coloured socks – I’m knitting these simultaneously but they are still stalled half way through the feet.
- a green jumper for my husband to my own design.
- a pi are square shawl in very chunky yarn.
I realised, as I worked towards the finishing line on my daughter’s knitted dress, that I often stop working on projects when they are very close to completion. The woven shawl, for example, is stopped half way through the second band of patterning (there is a wide band at each end of the shawl). I probably only have another 6 inches to work and it’ll be off the loom. So why have I stopped?
I realised that somewhere near the end of a project, I start to doubt that it’ll be as good as I imagined it at the start. So, instead of facing disappointment, I simply stop working on that project and move onto the next one. This is daft, because when I do finish things I’m usually delighted at the result. If I’m not delighted then the item can usually be modified or embellished or given away (if it’s a poor fit for the original intended recipient).
Anyway, I was motivated to finish my daughter’s dress because:
- If I didn’t finish it quickly it would be too small.
- It’s a one ball project – so I wanted to use up as much of the yarn as possible.
- I wanted to see what the wavy pattern would look like once it had been blocked.
We may become infamous…
Additional details
The wheel has No. 4 written in a number of places (including under the table, under the treadle and on the tensioning device on the mother-of-all). Is this the 4th wheel the maker made?
There are also three letters that could be initials underneath the tensioning device on table of the wheel (the mother-of-all needs to be removed to see this):
Another wheel
Today I picked up my latest acquisition. It’s a Dryad wheel. It has a 26inch diameter drive wheel and is double drive. The previous owner used this wheel to spin enough thread to weave 10.5 metres of suiting fabric! It was also apparently on TV with its former owner and therefore had its original Dryad label removed.
Here’s a picture of the new wheel next to my Haldane. (The Haldane is sulking – when I picked it up to move it ALL its legs fell off!)
Close-ups of the mother of all, flyer and back maiden:
Treadle:
Pegs and wedges for the wheel (including marks on each one so that the correct wedge is replaced in the right slot:
The edge of the wheel (showing the joint) and the hub of the wheel:
I’ve given the wheel a quick clean and oil in key parts and spun a little bit of yarn to try it out. My only problem was finding an orifice hook small enough to thread through the orifice (all my other hooks are for the Ashford Traditional and are much too big). My DH has fashioned me a temporary one from a paper clip (though even the paper clip was too big and a new hook had to be formed!)
My next job is to give her a thorough clean and polish and then I’m looking forward to doing some serious spinning on her. In the meantime I need to find her a space to live in my house…
Spinning experiments
I’ve been very busy of late – but I’ve been trying to keep up with my spinning. At a recent guild meeting we practiced long draw spinning from a cloud of yak down. I ended up with 3/4oz and 80 yards of lovely soft plied yarn.
I have spun some thick and thin singles and plied them together. I now have two huge skeins of black and white Shetland (I plan to make a hat and scarf from these).
I also hope to do some weaving with my handspun. For this I’ve spun a single – long draw – of handpainted Corriedale (Birds of Paradise colourway from yarnscape). I’ll be using this as a single for the weft.
I’m also spinning some BFL worsted style (colourway Violetta also from yarnscape). I will be plying this to make a (hopefully) strong warp.
There’s quite a difference between these three yarns: