Fractal Spinning Dorset Horn

My oldest is off school sick today – so I’ve just been showing him the blog I keep (I think this is the first time he’s seen it!)  He asked me how long it is – so we had a look – and the first posts were nearly 5 years ago!  Eeeek!  I think a Blog Birthday Party will be in order in a few weeks time!  Anyway, while he’s now occupied making paper snowflakes (I think he’ll be ok for school tomorrow), I shall quickly write this post…

On Friday evening I decided to start spinning the Dorset Horn.  It’s very squishy and I’m thinking it’ll make a nice hat.  I love the colours that this top ended up, but I’d like to see them jumbled together, so I’ve decided to spin this as a fractal.

Doesn’t that sound scary?  Let’s use a complicated maths term for a really simple technique (this I find is the way of lots of things, the more complicated someone has decided to make something sound, the simpler it is in reality)!  All this term means for spinning is that the colours in each single repeat at a different rate.  The tops are split into wide, medium and thin strips and these are then spun and plied as normal.  The singles resulting from the thin strips of top have shorter lengths of each colour than those in the medium and thick lengths of top.

For this project I’ve split the top widthwise into one-third and two-third lengths.  (Actually, I split it into halves initially, realised my mistake and vaguely reassembled it before making the split in the correct place!)  The longest piece I then split into half lengthwise, and one of those halves got split lengthwise again.

I started spinning the thinnest strips first, finishing the first single over just two evenings.

single

I’ve also found a use for the label!

label

I may get organised yet!

A Very Quick Show and Tell

I’m in the middle of a dyeing session, so this is a quick summary of some finished projects.

First up is a Mobius neck warmer/cowl (I’m not too sure how small it can be and still be called a cowl).  This was knitted in garter stitch from my first coreless core spun yarn and is in Shetland and Mohair:

mobius

Second up is the crepe yarn, finally finished.  On the right is the skein I finished months ago, and on the left is the skein I finished a few days ago:

crepe finished

Finally, is some more coreless core spinning.  This time in Blue Faced Leicester and bamboo fibre.  This started as some dyed Blue Faced Leicester tops (not my dyeing).  The colours were perfect and the top looked lovely.  However, try as I might I could not persuade it to draft.  I tried fluffing it, attenuating it, stripping it down… but as soon as I tried drafting it the fibres refused to budge.  In the end I concluded I’d need to card it before spinning it.

bfl

I’ve read about breaking tops into parts and sorting by colour to create a gradient.  This is what I started to do, I stripped the top into thin lengths, then pulled these apart.  I sorted them roughly into piles, then sorted through again, until I had seven piles in a range of colours.  However, the piles were not all the same size, so I went through my commercially dyed BFL tops and found two with similar colours, that I added in differing amounts to the piles.  Then I added black gold bamboo (which is a lovely charcoal colour) to provide a consistent base (and tone the colours down slightly) and some contrast colours in bamboo and BFL.  I created 7 batts, on the drum carder, from these piles.  I’ve been spinning them for a little while now, and finished them yesterday:

gradient

gradient-close

Micro Blogging

It’s been a ridiculously full couple of weeks.  Gardening, putting holes in walls to fix a mirror, pictures, a light and a curtain poll up, visit to IKEA, visits from and to my mum’s, half term, visit to my solicitor, spinning wheel acquisition, spinning, carding and Instagram!

Ah, Instagram!  I think I’ve fallen for its charms.  I’ve been using it for nearly a year, initially sporadically, then more intensely through the Tour de Fleece and now I find I’m using it nearly every day.  This morning I got back home, the sun was shining and I realised that there are still many flowers in the garden, despite it being November!  So I took Instagram for a tour.  It was lovely photographing so much colour despite the time of year.  I may repeat the process periodically, it’ll be interesting to see how things change through the year.

If you are on Instagram, do look me up, it will be lovely to meet you!  You’ll find me as hasknits

On the spinning front I’ve been working on a number of things.  I’ve got some coreless-corespun currently in progress.  The fibre is BFL and bamboo drum carded together.  I’ve finally finished the second skein of crepe-yarn and I’ve knitted a small Mobius cowl/neck warmer with my fist coreless-corespun.  More details on all of these will follow in a future post (I need to take some pictures!) though here’s a teaser for the BFL/Bamboo:

batts

I’ve also finished my long-term travelling project.  I usually have something on the go on my travel wheel, so I can just pick it up and go to craft meetings and spinning demos.  Often it’s the project I work on when I’ve done everything else I’ve wanted to do!  I think it’s some humbug BFL I dyed, but I’m suffering with my labelling problem again, so it could be something else!  It’s Navajo plied to keep the colour striping:

bfl-single

BFL-navajo

 

Travelling Back in Time

I promise I’ll stop using the Time and Space theme shortly, but for this post I need to go back in time a little way.  I was so excited about finishing the shawl that I skipped straight past some yarn I’d finished spinning!

I was exploring coreless core spinning: I carded some batts and spun them up at a spinning meeting.  I’d dyed some tops and thought they would be a good sunset, but they were the perfect colour to use for thread plying (I shall have to dye some more!)  I aimed to spin about 150m on the lace flyer of my Ashford wheel.  Judging by how much is still on the bobbin I overshot this by quite a way (I have yet to learn a method for estimating the amount of yarn spun on a bobbin).

single-thread

I currently only have one bobbin for the Pipy Poly wheel, so the single of coreless core-spun was wound into a skein and transferred to my swift.

single-ccs

together

I then spiral-plied with most of the tension on the thin single and barley any tension on the thick single (I found it tricky to adjust the tension much, this was very much what these two singles wanted to do).

ccs-finished

ccs-finished-too

I’m curious to see how this looks when made into a fabric. I shall probably knit with it, but I think it would also make a very nice woven fabric. I’ve already carded some more batts for another coreless core spinning project, so I can see I’ll be exploring this technique for some time to come!

A Shawl for Time Travel

My assistant Harriette is of the opinion that she would rather be the assistant of a certain time travelling Doctor.  Since taking on the role of my assistant she has felt herself to be severely underworked and believes that if she were travelling with the Doctor she would have been enjoying lots of adventures and still be back in time for a photoshoot.

Today, in her second assignment in two months, she is modelling a time travelling shawl with 78 glittery bowties scattered over a swirling, corespun, time-vortex background.

Shawl

Shawl

Shawl

Shawl

Shawl

Harriette likes the finished shawl and plans to pack it for travelling with the Doctor. The only thing it needs to finish off the look: a TARDIS shawl pin.

Blogging in Space

I’m not really blogging in space, but what a thought:

“I started knitting these socks last night.  I asked the replicator to produce some cellulose fibre yarn like the bamboo yarns produced in the 21st century.  It manages these types of yarns quite well, but it struggles to produce yarn with the feel and natural bounce of real wool.  I’ll have to wait until we get to the next planet with animals that produce a wool like coat before I can get anything like that…”

On the space theme, last night I finally cast on for the shawl using the bowtie yarn I started spinning during the Tour de Fleece.  The shawl is growing quickly.  I started knitting it on the Lantern Moon needles I bought at Fibre East, as it grew I transferred it to the circulars I have, then transferred it straight back to the straight needles.  Though the Lantern Moon needles are very heavy (they are 15mm) the stitches slide over the polished surface really well, and the point is beautifully shaped.  So, for the moment I’ll put up with the weight and knit in short sessions.

The shawl will be triangular and I’m knitting it from the neck down (starting with a garter stitch tab), with increases for shape in the middle and at the edges of the rows.  The weather has made photography difficult today, but here is progress so far:

bowties.jpg

And what set me off on the space theme?  Well, after my posts on Saturday my web host emailed to say I was getting close to using up the space I’m allocated.  Initially I thought that wasn’t a big problem, just upgrade to the next package, but it turns out that costs nearly three times as much!  So, I’m going to have to do some serious web and blog management in the near future.   Not only do I still need to fix the look and feel of the blog which got broken after I upgraded WordPress, but I now either need to streamline my blogging or find a new affordable home for it!  So, if I suddenly go quiet on the spinning and knitting front, that’s a likely reason!

Now, where did I park my TARDIS?

The Two Year Yarn

For me two years is not a long time to leave projects languishing.  I left a cardigan for about seven years before it saw the finish line (and then I didn’t like it and gave it away!)

I started blending and spinning this in August 2011 and it took the Tour de Fleece to finish the spinning.  Last week, spurred on by the need for a lace bobbin, I finally managed to get it plied.

It’s turned into a soft and glossy 3-ply yarn with just a hint of sparkle (there is a small bit of Angelina carded in).  I don’t currently have plans for it, though a shawl is a likely destination.

soyblend

Project Control

Today I realised that I need to get control of both my fibre stash and my works in progress.  I wanted to see what soybean fibre would look like blended with some dyed BFL.  It took me half an hour to find the soybean fibre – tucked away in a suitcase that I thought was empty!  I try and avoid storing things in my suitcases because it makes packing, which I don’t enjoy doing, an even bigger chore.

On Sunday and last night I spun up the seven batts of Shetland and mohair into a coreless core-spun single.

coreless-core

I would like to see what this looks like plied with a thread and I want to spin a fine single for this.  I have a number of wheels I could use, but one of the best for the job is the Traditional with the lace flyer.  Sadly all three of its bobbins are currently full of Shetland and soybean fibre, of which I only plied a little during the TdF.

So, tonight, I’m going to do some long overdue plying and try and finish some yarn I’ve been making for well over 2 years…

Sunsets

I love sunsets, they are so fleeting yet spectacular while they last. I take a lot of pictures of sunsets. Here’s a selection from the last few months:

collage

This week has been good for sunsets (we’ve had clearer skies than we’ve had for a while and some lovely warm September days). I’ve been wondering if I could use a sunset as the inspiration for a yarn.

It’s quite a common practice for a picture or an object to be the inspiration for a yarn. It’s the approach taken in Creative Spinning.  It’s also the approach I took when designing and spinning my Doctor Who yarn.  The structure, the colours and even the materials chosen to create the yarn can all be inspired in this way.

But how abstract can the yarn be? I could select colours that are in the sunset: gold, red, peach colours as well as blues and greys, then blend these together to produce a marled yarn. From a distance it could look fairly brown or beige (depending upon the strength and balance of the colours selected), but up close the colours would be obvious and give a pleasing depth to the final piece.

Alternatively, I could keep the colours more distinct, and produce a yarn that gives more of the appearance of the sunset when it is made into a fabric, but would still be very abstract and would be moderately uniform over the whole piece (like a fragment of the sky repeated over and over).

Finally, I could try and capture the whole sky from dark blue furthest to the east to peach and pale blue nearest the western horizon, with the reds, golds and greys of the clouds illuminated by the setting sun. This could be a yarn that contains a picture that’s revealed when it’s turned into a fabric.

I like the final idea. A yarn that when it’s woven or knitted could be an impressionist’s painting of a sunset, made with wool instead of paint.

I did some dyeing a few days ago. I used Sugarflair (artificial food colour) on white Blue Faced Leicester. I think the ball at the front contains many of the colours of the sunset. A starting place for my sunset yarn (the idea is likely to brew for a while, not least until I’ve cleared some works in progress off my wheels).

sunset-bfl

A Great Wheel and Coreless Core Spinning

Though not coreless core spinning on a Great Wheel!

Some of the mohair I mentioned in my last post was carded into two batts with some natural white Shetland.

mohair-batts

I then corespun this without a core (the core is made while spinning, just moments before it is wrapped in fibre):

coreless

This has become my entry into the Ashford UK Spinners (AUKS) “First Challenge” on Ravelry.  It’s been a year since AUKS was born and we now have well over 300 members.  To celebrate our first year in existence Elaine (one of the group’s moderators) has worked very hard to organise a spin-along with some fantastic prizes.  The challenge was to have a first go at spinning something, be it a new technique, a new tool or a new fibre.  This was the first time I’ve spun with mohair and my first ball of coreless core spinning.  It’s been lovely seeing what other members have chosen to spin, and this week pictures of the final skeins have started to be posted.

I still had most of the mohair left, so while at Creating Space a few days ago, I handcarded that into clouds too.  I added some glitter and started drum carding again.

clouds

Which I finished off with a late night carding session.

stack

All ready for my next coreless experiment!

While at Creating Space I had the wonderful opportunity to try spinning on a Great Wheel.  She’s called Catherine (after St Catherine the patron saint of spinners) and belongs to the Guild of Longdraw Spinners.

wheel

I’m concentrating very hard (thank you Norma for the opportunity and the photo):

concentrating

I’m now wondering if I should get a quill for one of my wheels!