Tour de Fleece–Day 2

The sun is currently setting on day two, and an absolutely stunning sunset it is too (sadly my photography skills have never been up to capturing the beauty of a sunset, though if I keep trying maybe one day I’ll succeed)!

day2-sunset

Today has been filled with the palaver of installing an integrated dishwasher into the kitchen.  It entailed three trips to local hardware stores before the right bits of waste pipe were sourced and there was further bodging (technical plumbing term) to fix a leak right the end of the day.  However, It is now installed and running and appears to be a huge improvement over the old one.

I failed to keep up with the spindle spinning today.  However, at one point I needed to escape and quietly exited the kitchen, found fibre, went upstairs and dusted and oiled the Dryad wheel.  I then managed a few minutes peaceful spinning.

I’m spinning some Falkland dyed by Juno Fibre Arts.  It’s a real treat to spin something dyed by someone else.  The colours are different from the ones I would have chosen and the distribution and proportions of colours are also different.  I’m looking forward to seeing how this will come out.

fibre

I think I’ll Navaho ply it to maintain the changing colours.

day2-juno

Right, the sun is almost gone, so I think it’s time I grabbed another cup of tea and did some more spinning!

Tour de Fleece Day 1

Today saw the start of the Tour de France (apparently – I haven’t watched any or even caught up on events via the internet or radio).  It also saw the start of the Tour de Fleece (TdF)!

Yesterday evening I got myself all prepared and set up my “stash” on Ravelry for the yarn I’m planning on spinning during the TdF.  There are projects that are in progress and some are new projects to spin.  Once I had everything listed I was quite shocked to see how much I’m planning on doing!  I also updated my Ravelry profile with my aims for the TdF.

Today has been a busy day with the children, so I haven’t had time to do much spinning.  Last night I decided that the best way to tackle spinning today was to concentrate on spindling.  So I made sure that the two active spindle projects were easy to grab in quiet moments (there were a few – not many – but some) and I was able to make noticeable progress!

Both spindles already had some singles on, but here was progress by the end of the day:

tdf-day1

This evening I’ve sat down at my Ashford Traditional with the lace flyer and made some progress on the Shetland/Soybean blend that I started nearly two years ago!

I’m looking forward to getting lots more spinning done over the next few weeks and seeing just how much I can do when I prioritise spinning over other non-essential activities.

Wild and independent

Today has been a lovely day. The rain has stopped and the sun has appeared. The apple and lilac trees are still in blossom and the Horse Chestnuts are decked with their candles of white and dark-pink flowers.

apple

lilac

The best part of today though, was getting some carding and spinning done in the company of other very creative people. A day filled with spinning, weaving, sewing, quilting, carding, painting and knitting. It was a positive delight of colour, shape and texture. I went along with my car filled with tools, equipment and fibre, but no real idea of what I was going to do. After getting myself settled (which always means getting a cup of tea) and sorting through my boxes I was starting to see the beginnings of some inspiration.

I wanted to spin something “wild and independent”, as was suggested by Lyn following my last blog post. After discussing this on Ravelry I’d decided that locks and glitter wasn’t too over the top – but I still wasn’t sure what I was going to spin.

In the end I decided on some Shetland humbug tops I’d dyed, but the original tops had been a disorganised mess and really needed carding to make them usable. To this I added some commercially dyed “poppy” Shetland and some rainbow trilobal nylon. I tried out the combination on a hand-carder then decided to drum card some batts. I made four equal piles of fibre, or at least I tried to – I didn’t have scales and no-one else had brought any either, so I did it by eye.

pile

When drum-carding I didn’t use the licker-in at all, I simply turned the drum while applying the tops directly to it. This is the first time I’ve tried this approach.  Sometimes the drum would grab a larger lump of fibre than I desired, but otherwise I was able to fill the drum fairly consistently. A couple of times I did get into a tangle where the licker-in grabbed the tail-end of the tops and started feeding that in as well as the tops I was applying directly to the main drum. (I do hope you’re a spinner and following this. I’ve just realised that I’m talking a special spinner’s language here and perhaps I need to think about a glossary on this blog?)

drum

I made four reasonably consistent batts. I didn’t do any blending beyond putting the fibre on in layers (a little like a lasagne: dyed tops, nylon, poppy, dyed, nylon, poppy,…)

batts

I then split the tops lengthways and pre-drafted a little before spinning in a worsted style. There a quite a few lumps and bumps, mostly deliberate (after all this is a wild yarn).

day

The results of a day’s work. I’m planning on Navaho plying and adding the locks of Leicester Longwool at that stage.

Half way there

Before I came home yesterday, I’d finished, washed and dried my first skein of crepe yarn.

Late this afternoon the sun finally popped out from behind the rain clouds that have kept us indoors for much of the day.  I grabbed my skein and my camera and put a pretty book and the skein on top of the stacks of paperwork and books that seem to have migrated to the part of my desk I’m trying to keep clear for project photography (it stays clear for about 5 minutes, then gets invaded by the usual junk all over again).  So I added the macro lens to my camera and tried to hide the junk.

crepe yarn

I’m fairly happy with this as a first skein of rickrack yarn.  It’s a long way from perfect, but it’s predominantly balanced and overall the yarn is interesting.  For the first time ever I think I’m going to need to sample this before I decide on an end project.  And there’s still a second skein to complete…

A breather

I have paused from what has turned out to be a mammoth plying task.  I’m working on the last stage of the 3-ply crepe yarn.  I started working at about 8pm this evening, setting up the skein of (deliberately) over twisted 2-ply onto the swift and the thin z-twist single onto the built-in Lazy Kate of this wheel.  I eventually stopped about halfway through the plying at 10:30pm when my neck was starting to feel achy.

setup

When I started the plying I had to fight the wheel while I persuaded it to take up the yarn (all previous spinning on this wheel has had me fighting too strong take-up and having to lace the singles once or twice between the flyer arms to get a reasonably gentle take-up).  I swore when the yarn jumped out of the open flyer hook (there is no orifice on this wheel) and tangled up instead of winding onto the bobbin.  I was worried that working from a skein of yarn from the swift would give me problems, but this has worked well.  Sometimes my single and two ply has got a bit tangled, so next time I’ll set up the swift on my right-hand side instead of behind my wheel.

Anyway, I eventually managed to get a balance between twist and take-up and I started being able to think about the yarn I was producing.  It took quite a while to get the right way to work on this.  I say the right way, but until I’ve washed and set the twist it’s going to be difficult to tell if it’s completely right.  However, the yarn does seem to snap into place when it’s going correctly.  I’m not holding the yarn in the way I would normally when plying (the single I’m holding fairly straight and the 2 ply I’m feeding in at a slight angle).  I’m working at it slowly so that I can control the amount of twist.  This means that I’m taking much longer to ply this yarn than I would normally take.

My yarn is not yet consistent, but as you can see when it’s working it’s very pretty.  I’m looking forward to seeing this washed and set.

yarn

bobbin

Purple Paradise

What a terrible name for a shawl.  The name is derived from the names of the tops I handspun and I’m now weaving into a shawl.

One of the yarns is a 2-ply Blue Faced Leicester, that I spun worsted style from hand-dyed tops called Violetta.  The other is a single of Corriedale spun long draw from hand-dyed tops called Birds of Paradise.  I spun these originally nearly 2 years ago!

I’ve tied a 100” (2.5m) warp onto my 16” rigid heddle loom, set at 7.5epi.  I’ve warped up nearly the whole width, leaving just one eye on each end of the loom without a warp thread.  When it came to warping up I wasn’t sure the thread was going to be robust enough and I want to minimise warp threads getting broken.  The rigid heddle has slots and eyes, threads in eyes experience the most stress and wear during weaving. Threads at the selvedge often get drawn in and therefore also experience more stress and wear than other threads.  So I wanted to avoid having a selvedge thread that would experience further wear from also being in an eye.

To further help with wear I’m keeping the tension as low as possible and winding the warp on regularly.  As for an earlier project I’m winding paper onto the front roller when advancing the weaving.  This is helping to keep the tension on the weaving even across the whole work.

I’ve woven about 18” so far and it’s looking good.  The weft thread is fairly slubby, but that’s making the weaving look very interesting.  I’m not too sure how the woven fabric will behave when it’s off the loom as the weft is a fairly active single, so it may collapse.  I’ll have to see what happens!

Here’s progress after tying on the warp and weaving a few picks:

shawl-begun

Crepe Yarn in Progress

It’s been a while since I last made a blog post.  Various reasons, including the continued poor weather.  Even though it’s now March and the crocuses and the early daffodils are up, we are still having cold, snowy, frosty and grey days.  Sadly this makes taking pictures tricky.  However, the sun finally came out briefly yesterday afternoon, so I’ve been able to take pictures of work in progress.

A few weeks ago I received a lovely spinning book for my birthday.  It’s The Spinner’s Book of Yarn Designs by Sarah Anderson:

spinners_book_yarn_design

Yes, I did just grab that image from the preview on Amazon’s site.

The book’s absolutely brilliant.  Full of inspiring techniques and ideas for yarn constructions I’ve not come across before.  I love the clear diagrams that show the construction of a yarn at a glance.  My first project inspired by this is a 3 ply yarn, with a construction similar to a cabled yarn.  It’s called a Crepe yarn.  2 singles are spun in one direction, then plied.  Then a second single is spun in the plied direction and plied with the original 2 ply.  Are you still following?  No? The “at a glance” diagram would really help here – which is one reason the book is so brilliant.

I’m spinning this with a thick single from my dyed BFL (the pinky/orange one), here it is a few weeks ago:

and two thin singles of natural white Shetland.  I was aiming at a Bubble or Rickrack Crepe yarn, but I don’t think there’s enough difference in the thickness of the singles.  At the two ply stage I have two almost full bobbins of yarn.  However, I don’t have enough bobbins for the wheel I’m using for this spinning, so have wound the 2-ply off into skeins:

crepe-2-ply

As there’s a lot of unbalanced twist in this 2-ply, the skeins are a little like super-scrunchies.  I’m sure there are good reasons not to handle the yarn-in-progress in this way, but I’m afraid I don’t know them (a little knowledge at this stage may be a dangerous thing).  At the moment I’m working on the second white single.  When I ply I’ll put each skein onto my swift and ply from the swift and a bobbin.  I’ve not done this before!  It could all turn into a huge tangle of wild yarn!

Beaded knitting

I’ve started to add the beads to the cowl.  It was quite difficult to know where to start and how to place them.  Should I place them randomly or in a pattern?  I’ve decided to place them in regular pattern because it’s very difficult to create a truly random design.  As I’ve not added the beads onto the yarn already I’m adding them by using a very fine crochet hook to slide the bead onto the live stitch.

Beyond this current round I’ve not made any further decisions.  I’m designing this as I’m knitting it, making it up as I go along.  I’m enjoying the freedom.  There is however one catch: if I make a mistake it’s likely to remain as the yarn doesn’t really like being unravelled.

withbeads

Finish, start, start!

Sometime ago I dyed some Blue Faced Leicester, hung it up to dry, made the tops into a chain and then started to spin it.  It’s finally finished.  I decided to Navaho ply this and created two skeins.  In total there are about 490 yards:

bluebfl

As I’ve finished lots of projects recently, it’s time to start some new ones.  First I’ve started to spin the last batch of BFL I dyed – this is the pinky-orange tops as a single:

pink-orange-single

I’ve also started to knit a Moebius cowl:

moebius

This final project is being knitted in some Rico Poems yarn.  I bought the yarn because it was in a lovely range of colours and then put it in my stash until I found a project worthy of the lovely yarn.  At least I thought the yarn was lovely until I got it out and tried to use it.

I tried Tunisian crochet with it, worked a few stitches and noticed that the yarn was twisting up, so decided that knitting it would be best.  I rewound the ball and put it into my work-basket. 

A few days later I realised that this was a mistake, the ball was starting to come apart.  I tried to rewind it, then put it into a plastic zip bag for sorting out later.  Later came while staying at my Mum’s.  I fished the yarn out and asked to borrow the ball winder. 

At this stage the ball decided it was going to be two balls, with random loops of yarn in between and twisting around.  It took two knitter’s about half an hour to tame the run-away ball into two neat re-wound balls.

I decided that the new project would be a Moebius cowl.  I found the instructions and a long cord for my needles and cast on (and on).  The cast on was lovely and easy, but the next row was hard work.  However, after a very long time I got through it (though noticed that the yarn was fluffing up from the work, which was surprising for a sock yarn).  Undaunted I’ve carried on and now it’s starting to look rather lovely However, I did notice I had managed to knit two stitches together at one stage, now fixed by dropping the stitches down a few rows and re-working them back up.  The yarn is also still twisting up really badly and periodically I hang the loop of knitting down and gently untwist it (one time I untwisted a little too far and the yarn drafted apart).

I’ve decided after all these problems that this cowl is going to have to look gorgeous.  In addition to the colour I think it needs something glittery, so I’m going to add beads.  What could possibly go wrong (it’s the first time I’ve added beads to knitting)?

Work in progress

Having started January with completed projects, I thought it was time to share things that are on the wheel, spindle, needles or loom.

Feb13

Clockwise from top left (more or less) are:

  • An alteration to a jumper to make it more suitable for my daughter.  So far I’ve taken most of the blue bands off and repaired the moth holes.
  • Blue BFL singles on the bobbins.  The singles are completed but it’s not yet plied.
  • Shetland and soya fibre drum carded batts and three bobbins of singles.
  • A project to convert some soft-spun chunky singles into three-ply yarn.  I’ve lightly unspun the commercial chunky yarn and turned it into pencil roving that can be drafted and spun finely.  In hind-sight I should possibly have given the chunky yarn to a knitter who would have enjoyed it and bought myself some more top.
  • Soay-cross fibre.  Processed from the raw fleece by me.  I’ve got about 10 oz drum carded.  It needs carding into rolags and can then be spun.  The final destination of this may be a shawl.
  • Jacob yarn.  This is an early yarn of mine – it’s currently being knitted into a shawl (not shown).
  • Chunky orange, blue and red Pie-R-Square shawl.  I seem to have endless balls of this yarn.
  • Pair of socks.  All I need to do is finish off the toes.
  • Spindle spun blue Shetland.
  • (Not shown) Cambridge Beauty overshot weaving that’s currently on my 4-shaft loom.

I think that’s everything.  But there may be another project or two lurking in the bottom of a box.

I’ve got lots to finish off then!